NodeMCU Lua W ESP-12E ESP8266 2.4GHz WiFi modulis

Features

• 802.11 b/g/n
• Integrated low power 32-bit MCU
• Integrated 10-bit ADC
• Integrated TCP/IP protocol stack
• Integrated TR switch, balun, LNA, power amplifier and matching network
• Integrated PLL, regulators, and power management units
• Supports antenna diversity
• Wi-Fi 2.4 GHz, support WPA/WPA2
• Support STA/AP/STA+AP operation modes
• Support Smart Link Function for both Android and iOS devices
• SDIO 2.0, (H) SPI, UART, I2C, I2S, IRDA, PWM, GPIO
• STBC, 1x1 MIMO, 2x1 MIMO
• A-MPDU & A-MSDU aggregation and 0.4s guard interval
• Deep sleep power <10uA, Power down leakage current < 5uA
• Wake up and transmit packets in < 2ms
• Standby power consumption of < 1.0mW (DTIM3)
• +20dBm output power in 802.11b mode
• Operating temperature range -40C ~ 85C
• FCC, CE, and ROSH certified

Specifications

• Certificates: FCC/CE/ROSH
• WiFi Protocles：802.11 b/g/n
• Frequency Range：2.4GHz-2.5GHz (2400M-2483.5M)
• Peripheral Bus：UART/HSPI/I2C/I2S/Ir Remote Contorl/GPIO/PWM
• Operating Voltage ：3.0V-3.6V
• Operating Current: Average value: 80mA
• Operating Temperature Range: -40°~125°
• Ambient Temperature Range: Normal temperature
• Package Size: 16mm*24mm*3mm
• External Interface: N/A`
• Wi-Fi mode: station/softAP/SoftAP+station
• Security: WPA/WPA2
• Encryption: WEP/TKIP/AES
• Firmware Upgrade: UART Download / OTA (via network) / download and write firmware via host
• Support software Development: Supports Cloud Server Development / SDK for custom firmware development
• Network Protocols: IPv4, TCP/UDP/HTTP/FTP
• User Configuration: AT Instruction Set, Cloud Server, Android/iOS APP